How to fit you Made to Measure Perfect Fit Blinds from Blinds4Sale | Perfect Fit Assembly Instructions Fitting to Corner Pieces - All Perfect Fit Frames are supplied with the blind built in place on the top frame or to the bottom frame
- The top, bottom and side frames will need to be assembled
- This is achieved by sliding the side frames on either side into the pre-fitted corner pieces of first the top and then the bottom frame
- Securing at the back using the screws provided
- If skylight or pleated options are selected the headrail will need to be clipped into the pre-fixed clips
- Your frame is now ready for installation
|
| | Fitting the Perfect Fit Blind to the Window Frame Insert window fixing brackets
- For the correct spacing distance (85mm) place a credit card into the corner of the window
- Line up the window fixing bracket at the base of the card (or top of the card depending upon which corner of the window you are working) and fit the bracket by pushing it between the glass and the rubber seal of the window.
- Using the credit card guarantees a perfect line up for each of the holes in your frame with each of the brackets
- Fit any intermediate brackets accordingly.
|
| Fix frame to window - Line up the holes in the frame with the window fixing brackets
- Firmly press down the frame onto each bracket on one side at at time to ensure easier installation
- Your blind is now installed.
| | Perfect Fit removal Removal for cleaning purposes - To remove the frame from the window, raise the blind to a completely open position
- Release the frame from each bracket by inserting a flat-headed screwdriver into the hole and depress against the lip of the bracket.
- Remove one side at a time to ensure easier removal.
|
|
