How to fit your made to measure Vertical Blinds from Blinds4Sale  | Face Fixing Brackets Fix brackets to wall or window frame as closely as possible to the ceiling or lintel with same spacing as recommended for top fixing brackets.
| 
| Top Fixing Brackets Fix brackets to ceiling or lintel on a line at least 3" (75mm) from the wall or window frame for blinds with 5" (127mm) louvres or 2 1/8"(55mm)for blinds with 3 1/2" (89mm) louvres. End brackets should be about 1 1/2" (40mm) from the ends of the track. Any remaining brackets should be spaced out evenly between these brackets.
|
| Fitting the Track - Remove packing material from track, releasing the cord and chain. (Cord control traverses louvres and chain control rotates them. Track must be fitted into the brackets keeping controls to side ordered. Locate the small lip projecting from brackets into groove in track. Push track up into brackets. Spring clip brackets will hold your track without further adjustment. | Fitting the louvres - Turn hooks so the slots are 90 degrees to the track. Hang louvres keeping all the seams facing in one direction. Your blind is now ready to operate. IMPORTANT: DO NOT TRAVERSE BLINDS WITH LOUVRES IN CLOSED POSITION. ALWAYS TURN THEM 90 DEGREES TO THE TRACK BEFORE OPERATION CORD CONTROL. |
|
